Elan D12 Installationshandbuch PDF herunterladen (Seite 45)

E L A N H O M E S Y S T E M S

D12 INSTALLATION MANUAL

ELAN Special Application

Prerequisites:

Factory defaulted

ELAN mode

Channel Range

Set to 1 to 12

See:

"Restore Defaults" on page 20

"Operating Mode" on page 13

"Channel Range" on page 23

With the same wiring as before you can control the D12's volume output directly.

Instead of sending ELAN zone volume commands to the ELAN System Controller, send D12's Channel 1 Volume

Up/Down or Channel 2 Volume Up/Down IR Commands to the D12.

ELAN Special Application

Prerequisites:

Factory defaulted

ELAN mode

Channel Range:

Set to 13 to 24

VIA!NET Address:

Set to 0 on first Chassis and set to 1 on second chassis

See:

"Restore Defaults" on page 20

"Operating Mode" on page 13

"Channel Range" on page 23

"VIA!NET Address" on page 23

With the same wiring as before you can control the D12's volume output directly.

Instead of sending ELAN zone volume commands to the ELAN System Controller, send D12's Channel 13 Volume

Up/Down or Channel 14 Volume Up/Down IR Commands to the D12.

Since Channel Range is set to 13 - 24, you must control the channel's volume using different commands. When

a D12 is set to 13 to 24, the D12 is the second chassis in a two D12 chassis system.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 61 62

Keine Kommentare

Elan D12 Installationshandbuch Seite 45