Elan D12 Installationshandbuch PDF herunterladen (Seite 14)

E L A N H O M E S Y S T E M S

D12 INSTALLATION MANUAL

Rack Mounting

When mounting the D12 in an equipment rack, use the included Rack Mount Brackets for secure mounting and

proper ventilation. The D12 requires three rack spaces.

To install the D12 into a standard 19” equipment rack:

1. Attach the rack mount bracket onto the D12 chassis from the front as shown in Figure C-1.

Figure C-1

2. Ensure that the brackets are flush with the front of the unit. Install each of the eight screws (included) through

the side mounting flanges into the holes in the sides of the unit as shown in Figure C-2. Hand tighten screws!

Over-tightening could cause damage to the D12 Tuner.

Figure C-2

3. Once the brackets are securely mounted, install the entire assembly into a standard 19” equipment rack from the

front using four rack screws (not included). Three rack spaces will be used. See Figure C-3.

19" Equipment Rack

Rack Screws

Figure C-3

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 61 62

Keine Kommentare

Elan D12 Installationshandbuch Seite 14