Elan A6 Installationshandbuch PDF herunterladen (Seite 9)

E L A N H O M E S Y S T E M S

A6 INSTALLATION MANUAL

Chapter 1: Introduction

The ELAN A6 Power Amplifier is designed to provide a reliable, affordable solution for multi-room audio systems

requiring up to six channels of amplification. Using proven analog technology, the A6 adds advanced features like

Audio Sensing, Stereo/Mono Bus, and Trigger Inputs/Outputs to make it the premier amplifier in its price range.

A6 Features

6 x 60 Watts per Channel @ 8 Ohms

3 x 120 Watts per Channel @ 8 Ohms

• An output pair can be combined using a simple switch to send 120 WPC

of BRIDGED MODE audio to a passive sub-woofer.

• BUS MODE switching allows the bussed signal to be

sent to all channel outputs, excellent for commercial applications.

System Trigger In/Out

• SYSTEM TRIGGER IN allows all channels of the

amplifier to turn on when a signal is received.

• SYSTEM TRIGGER OUT sends a +12VDC pulse

whenever any of the channels of the amplifier are on.

Audio Line Outputs

• Send audio signals out from specific A6 channels

to line level inputs of other devices such as additional A6

amplifiers or audio processors.

Individual Channel Level Adjustments

• Fine-tune each channel’s level using precision potentiometers.

5-Way Speaker Binding Post

• The A6 is equipped with gold plated, 5-way speaker binding post.

This allows for five methods of speaker wire termination: bare wire,

spade lug, pin, single banana and dual banana plug.

IR Port Input

• +12VDC, GND, and IR Input plug allows up to four IR Receivers to pass-through

IR signals through the IR OUTPUT port adding more options and flexibility

to any IR signal routing

Safety Concerns

Use only grounded outlets when powering this product. Making any modification to the power cord could cause

unsafe operation and will void the manufacturer’s warranty.

AC Power Considerations

The A6 requires 3.7 Amps of AC current. When designing any whole house system using multichannel amplifiers,

make sure to provide adequate provisions for all electronic equipment to be installed. This may require additional

outlets and/or circuit breakers tobe installed. Consult a licensed electrician in this case.

ALL CONNECTIONS SHOULD BE MADE

WITH THE AMPLIFIER TURNED OFF

AND UNPLUGGED FROM POWER.

DAMAGE CAN OCCUR TO EQUIPMENT

IF IMPROPER CONNECTIONS ARE MADE!

THIS AMPLIFIER IS BRIDGEABLE!

DO NOT TRY TO BRIDGE OUTPUTS

WHILE AMPLIFIER IS ON!

DAMAGE TO THE AMP CAN OCCUR.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Elan A6 Installationshandbuch Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audioverstärker Elan A6